Charlotte PVC 01112 0600, 3 x 1-1/2 in nominal, Hub x Spigot end style, SCH 30, PVC, Domestic
PVC Schedule 30 Thin-Wall Pipe and Fittings are for drain, waste and vent purposes only. It is used in gravity fed waste elimination systems. It is for Non-Pressure systems where temperatures will not exceed
-
BrandCharlotte
-
UPC611942037315
-
Manufacturer Part NumberPVC 01112 0600
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
ColorWhite
-
Schedule RatingSCH 30
-
Nominal Size3 x 1-1/2 in
-
Domestic/ImportDomestic
-
Length2-5/16 in
-
End StyleHub x Spigot
- It is non-toxic, lightweight and easy to install
| Cross-Reference Number |
|---|
| 431713 |
-
UNSPSC40172308
-
Package DescriptionEACH
-
Standards/ApprovalsASTM D1784|ASTM D2949|NSF 14
-
WarrantyLimited Warranty
-
SDS
-
Warranty Information
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Charlotte PVC 01112 0600, 3 x 1-1/2 in nominal, Hub x Spigot end style, SCH 30, PVC, Domestic
PVC Schedule 30 Thin-Wall Pipe and Fittings are for drain, waste and vent purposes only. It is used in gravity fed waste elimination systems. It is for Non-Pressure systems where temperatures will not exceed
2" -FEMALE PIPE THREAD PIPE HYDRAULIC COUPLING-DAY50003232 >
HCI Preferred Supplier 560524 Pipe Tee, Steel, 1-1/2 x 1-1/2 x 1-1/2 in Nominal, FNPT x FNPT x FNPT End Style
HCI Preferred Supplier 560524 Pipe Tee, Steel, 1-1/2 x 1-1/2 x 1-1/2 in Nominal, FNPT x FNPT x FNPT End Style
Wheatland FasTrakâ„¢ Plus 550510000 Electrical Metallic Tubing, 2 in Trade, 2.067 in ID x 2.197 in OD, 10 ft L, Steel
Wheatland Tube manufactures steel EMT in America, using the latest technology and protocols to ensure the highest quality. Our proprietary smooth ID coating ensures up to 20% faster wire pulling. The light-wall EMT's mechanical properties allow for easy hand bending on small sizes and a smooth bend on intermediate and larger sizes. It's the ideal solution.
BCPR-5-ES LAWNMOWER SPARK PLUG-MED6130 >
The Zip-It® anchor is a 1-piece self drilling anchor designed for use in gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy designed for use with No. 8 screws in 3/8 to 1 in THK wallboard. The Zip-It® Jr. is also available in engineered nylon and Zamac alloy designed for use with No. 6 screws in 3/8 to 5/8 in THK wallboard. These fasteners are not recommended for use overhead or applications where holding values are critical.
