Gates® Power Transmission PowerGrip® 770XH200 Extra Heavy Timing Belt, 2 in W, 77 in OAL, 7/8 in Pitch, 88 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053233155
-
Manufacturer Part Number770XH200
-
CountryUSA|Canada
-
Pitch7/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeExtra Heavy
-
Minimum Pulley Diameter6.57 in
-
Width2 in
-
Series9257
-
Number of Teeth88
-
Overall Length77 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92574104
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 770XH200 Extra Heavy Timing Belt, 2 in W, 77 in OAL, 7/8 in Pitch, 88 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
EATON DP221NGB General Duty Plug Fusible Safety Switch, 120/240 V, 30 A, 1/2 to 2 hp, DPST Contact, 2 Poles
General duty safety switches are used in residential and commercial applications. They are suitable for light duty motor circuits and service entrance applications. Fusible (plug or cartridge) and non-fusible switches are available.
Gates® Power Transmission PowerGrip® 900L075 Light Timing Belt, 3/4 in W, 90 in OAL, 3/8 in Pitch, 240 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 90XL025 Extra Light Timing Belt, 1/4 in W, 9 in OAL, 0.2 in Pitch, 45 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® Twin Power® TP450H100 Heavy Timing Belt, 1 in W, 45 in OAL, 1/2 in Pitch, 90 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
3/8" -HOSEX6-FLAT FACE FEMALE-MHDE0606FF >
