Gates® Power Transmission PowerGrip® 900L075 Light Timing Belt, 3/4 in W, 90 in OAL, 3/8 in Pitch, 240 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC072053564747
-
Manufacturer Part Number900L075
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width3/4 in
-
Series9257
-
Number of Teeth240
-
Overall Length90 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572226
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® 900L075 Light Timing Belt, 3/4 in W, 90 in OAL, 3/8 in Pitch, 240 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 90XL025 Extra Light Timing Belt, 1/4 in W, 9 in OAL, 0.2 in Pitch, 45 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-LB BUG-B-GONE GARDEN SEVIN DUST-JWH701360 >
Anvil® 0318905361 FIG 383 Hex Head Pipe Bushing, 1/4 x 1/8 in Nominal, MNPT x FNPT End Style, 150/300 lb, Cast Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150/300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Hubbell Wiring Device-Kellems SHC1023 SHC Form 2 Standard Duty Straight Cord Connector, 1/2 in Trade, (1) Conductors, 0.38 to 0.5 in Cable Openings, Aluminum, Machined
Hubbell Wiring Device-Kellems SHC1023 Form 2 Standard Duty Straight Cord Connector, 1/2 in Trade, 1 Conductor, 0.38 to 0.5 in Cable Openings, Aluminum, Machined
Browning® PB9011 Taper Bore Bushing Kit, 1-3/8 in ID x 1-7/16 in OD Dia Bushing, For Use With TorqTaper® Plus Size 107SMTP Shaft Mount Speed Reducer, Ductile Iron
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
