Gates® Power Transmission PowerGrip® 154L100 Light Timing Belt, 1 in W, 15.38 in OAL, 3/8 in Pitch, 41 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053936698
-
Manufacturer Part Number154L100
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width1 in
-
Series9257
-
Number of Teeth41
-
Overall Length15.38 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572327
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 154L100 Light Timing Belt, 1 in W, 15.38 in OAL, 3/8 in Pitch, 41 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
HCI Preferred Supplier 28562 Industrial Interchange Hose ID Coupler, 1/4 in Nominal, Tube, Brass
HCI Preferred Supplier 28562 Industrial Interchange Hose ID Coupler, 1/4 in Nominal, Tube, Brass
Gates® Power Transmission Super HC® 5V1500 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 150 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Dodge® 083908 Middle Stage Module
Square D™ D223N F3 Series Enclosed Fusible General Duty Safety Switch, 240 V AC, 100 A, 15 to 30 hp, DPST Contact, 2 Poles
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a fusible disconnect and has a rated current of 100A for 240VAC. This general duty switch has a 3 wire configuration with 2 poles and a factory installed neutral. The device accepts H, K or R fuse types. The enclosure is surface mounted and is a Type 1. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
24 POLY LEAF RAKE-JWH756211 >
