756211 DO-IT-BEST/HWI PRODUCTS
24 POLY LEAF RAKE-JWH756211 >
| Cross-Reference Number |
|---|
| 756211 |
Recently Viewed
24 POLY LEAF RAKE-JWH756211 >
Temporarily or permanently cap off the end of PVC white sewer pipe or spigots.
HCI Preferred Supplier 65004 Swivel Nut Elbow, 7/16-20 Nominal, Male JIC Flare x Female JIC Flare, Steel
HCI Preferred Supplier 65004 Swivel Nut Elbow, 7/16-20 Nominal, Male JIC Flare x Female JIC Flare, Steel
Gardner Bender HST-125 Heat Shrink Tubing, 1/8 in ID Expanded, 1/16 in ID Recovered, 4 in L, Polyolefin, Black
Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120 deg C (250 deg F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125 deg C: CSA C22.2 No3 198.1, 125 deg C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637, DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55 deg C (-67 deg F) to 135 deg C (275 deg F). Shrink temperature: 120 deg C (250 deg F) to 250 deg C (480 deg F). 600 V/Mil Dielectric strength.
Tough Coat® provides the ultimate in durability and protective finishes. This high solids formula ensures maximum coverage and performance. Tough Coat® acrylic Enamels features our exclusive EZ Touch® FANSPRAY® Nozzle. This patented valve sprays a horizontal or vertical pattern and requires 50% less finger pressure than any other paint valve. A high solids formula ensures maximum coverage and performance. Tough coat delivers the ultimate in protection, durability, high gloss and color retention.
GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated
1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
