Gates® Power Transmission PowerGrip® 154L050 Light Timing Belt, 1/2 in W, 15.38 in OAL, 3/8 in Pitch, 41 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053936674
-
Manufacturer Part Number154L050
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width1/2 in
-
Series9257
-
Number of Teeth41
-
Overall Length15.38 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572127
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 154L050 Light Timing Belt, 1/2 in W, 15.38 in OAL, 3/8 in Pitch, 41 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-1/2" OR 1-1/4" X 1-1/2" SINK PVC J-BENDS WITH NUTS AND WASHERS INCLUDED-JWH410399 >
MCR Safety 34411L Luminator™ 34411 Insulating General Purpose Gloves, Driver, Gunn Cut/Wing Thumb Style, Pig Skin Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Black/Hi-Viz Orange/Silver/Yellow, Slip-On Cuff, Uncoated Coating
Browning® Gearbelt® 1054931 Type 2 Synchronous Timing Pulley With Flange, 1/4 to 11/16 in Bore, 1.508 in OD, 24 Grooves, 1.528 in Dia Pitch, 9/16 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Dixon® 3EM3-B Straight Through Interchange Quick Connect Coupling, 3/8-18 Nominal, MNPT, Brass, Domestic
Dixon® 3EM3-B Straight Through Interchange Quick Connect Coupling, 3/8-18 Nominal, MNPT, Brass, Domestic
HCI Preferred Supplier 28246 Male Run Service Street Tee, 1/4 in Nominal, FNPT x MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28246 Male Run Service Street Tee, 1/4 in Nominal, FNPT x MNPT x FNPT End Style, Brass
