MCR Safety HI-VIS INSL PIGSKIN-PALM GLOVE GLV 34411-L
MCR Safety 34411L Luminatorâ„¢ 34411 Insulating General Purpose Gloves, Driver, Gunn Cut/Wing Thumb Style, Pig Skin Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Black/Hi-Viz Orange/Silver/Yellow, Slip-On Cuff, Uncoated Coating
-
BrandMCR Safety
-
UPC045143344130
-
Manufacturer Part Number34411L
-
CountryUSA
-
Material7 ga Cotton Thread/Leather/Polyester
-
CoatingUncoated
-
ResistsAbrasion
-
ColorBlack/Hi-Viz Orange/Silver/Yellow
-
Glove TypeDriver
-
TypeInsulating
-
SeriesLuminatorâ„¢ 34411
-
Cuff StyleSlip-On
-
SizeL
-
Length9-3/4 in
-
StyleGunn Cut/Wing Thumb
-
Palm MaterialPig Skin Leather
-
LiningThermal
- Waterproof liner
- Fluorescent orange and lime fabric back with silver reflective stripe
- Comfortable knit wrist
- Keeps hands cool and well seen in low-visibility environments
- Allows comfortable secure-fit
- An angled thumb that provides increased flexibility and does not contain a seam between the palm and thumb
- This makes it durable and comfortable for extended wear
- Waterproof liner
- Fluorescent orange and lime fabric back with silver reflective stripe
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 2ELH4 |
| Fastenal | 1016137 |
| MSC | 02485258 |
-
UNSPSC46181504
-
Package Description1/DZ
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm
-
Specification Sheet
Recently Viewed
MCR Safety 34411L Luminatorâ„¢ 34411 Insulating General Purpose Gloves, Driver, Gunn Cut/Wing Thumb Style, Pig Skin Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Black/Hi-Viz Orange/Silver/Yellow, Slip-On Cuff, Uncoated Coating
Browning® Gearbelt® 1054931 Type 2 Synchronous Timing Pulley With Flange, 1/4 to 11/16 in Bore, 1.508 in OD, 24 Grooves, 1.528 in Dia Pitch, 9/16 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Dixon® 3EM3-B Straight Through Interchange Quick Connect Coupling, 3/8-18 Nominal, MNPT, Brass, Domestic
Dixon® 3EM3-B Straight Through Interchange Quick Connect Coupling, 3/8-18 Nominal, MNPT, Brass, Domestic
HCI Preferred Supplier 28246 Male Run Service Street Tee, 1/4 in Nominal, FNPT x MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28246 Male Run Service Street Tee, 1/4 in Nominal, FNPT x MNPT x FNPT End Style, Brass
MasterDrive H11/16-STL H Series Double Split Tapered Bushing, 11/16 in Dia Bore, 1-5/8 in Dia Barrel, 2-1/2 in Dia Flange, 1-1/4 in OAL, Steel
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
HCI Preferred Supplier 28564 Industrial Interchange Hose ID Coupler, 3/8 in Nominal, Tube, Brass
HCI Preferred Supplier 28564 Industrial Interchange Hose ID Coupler, 3/8 in Nominal, Tube, Brass
