Gates® Power Transmission PowerGrip® 960H100 Heavy Timing Belt, 1 in W, 96 in OAL, 1/2 in Pitch, 192 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566215
-
Manufacturer Part Number960H100
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width1 in
-
Series9257
-
Number of Teeth192
-
Overall Length96 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573242
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 960H100 Heavy Timing Belt, 1 in W, 96 in OAL, 1/2 in Pitch, 192 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
3/8"-HOSE X 1/4"-MALE PIPE THREAD 90 NYLON BARBS-GL-EL1438 >
3/8"-HOSE X 3/8"-MPT 90 NYLON BARB-GL-EL3838>
1/2X6-SSN-316 1/2" -male Pipe Threadx6" Stainless Steel NIpples #316"
1/2" -MALE PIPE THREADX6" STAINLESS STEEL #316" NIPPLE-FIT1/2X6SSN316 >
Browning® 1031921 AK Series Type 1 FHP Sheave, 7/8 in Finished Bore, 2-3/4 in OD, 2 Grooves, 2.7 in (A)/2.16 in (3L) Dia Pitch, 1-3/8 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® 1031962 AK Series Type 1 FHP Sheave, 3/4 in Finished Bore, 2.85 in OD, 2 Grooves, 2.8 in (A)/2.26 in (3L) Dia Pitch, 1-3/8 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
