Gates® Power Transmission PowerGrip® Twin Power® TP540L100 Light Timing Belt, 1 in W, 54 in OAL, 3/8 in Pitch, 144 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053615463
-
Manufacturer Part NumberTP540L100
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter2.83 in
-
Width1 in
-
Series9246
-
Number of Teeth144
-
Overall Length54 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92462318
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP540L100 Light Timing Belt, 1 in W, 54 in OAL, 3/8 in Pitch, 144 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
EATON Crouse-Hinds CD1 SA Straight Conduit Drain, 1/2 in MNPT, For Use With Conduit System, Copper-Free Aluminum, Chromate Treated Electro-Galvanized
Crouse-Hinds series CD drains are for use in ordinary location conduit systems to drain accumulated condensate and provide ventilation to minimize condensation. Drains are installed in hubs or drilled and tapped openings.
HCI Preferred Supplier 28541S Industrial Interchange Pipe Coupler, 3/8 in Nominal, FNPT, Steel
HCI Preferred Supplier 28541S Industrial Interchange Pipe Coupler, 3/8 in Nominal, FNPT, Steel
BRIGGS AIR FILTER-MED69036 >
Gates® Power Transmission PowerGrip® 570H200 Heavy Timing Belt, 2 in W, 57 in OAL, 1/2 in Pitch, 114 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1/2" -FEMALE PIPE THREADX1/4" -FEMALE PIPE THREAD HYDRAULIC COUPLING-DAY500084 >
