Gates® Power Transmission PowerGrip® 540L050 Light Timing Belt, 1/2 in W, 54 in OAL, 3/8 in Pitch, 144 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053564372
-
Manufacturer Part Number540L050
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width1/2 in
-
Series9257
-
Number of Teeth144
-
Overall Length54 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572118
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 540L050 Light Timing Belt, 1/2 in W, 54 in OAL, 3/8 in Pitch, 144 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 465H300 Heavy Timing Belt, 3 in W, 46-1/2 in OAL, 1/2 in Pitch, 93 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Browning® Gearbelt® 1055532 Type 2 Synchronous Timing Pulley With Flange, 3/4 to 1-1/8 in Bore, 2.492 in OD, 16 Grooves, 2.546 in Dia Pitch, 1-3/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
HCI Preferred Supplier 36182 Ball Check Grease Fitting, M10x1 Thread, 21 mm OAL, Steel
HCI Preferred Supplier 36182 Ball Check Grease Fitting, M10x1 Thread, 21 mm OAL, Steel
Split Leather Palm Work Gloves Competitive Value C Grade Shoulder Leather 2.5 Inch Rubberized Safety Cuff Durable rubberized safety cuff When you need a reliable pair of general-purpose work gloves that can withstand abrasion, puncture, and heat, leather palm gloves are an excellent choice. The MCR Safety 1200 model is a great option, featuring competitive value C-grade shoulder leather, grey fabric with red stripes on the back, a 2.5-inch rubberized safety cuff for extended protection, and a leather knuckle strap. For the best work glove options, MCR Safety is the brand to trust.
Gates® Power Transmission PowerGrip® 420L050 Light Timing Belt, 1/2 in W, 42 in OAL, 3/8 in Pitch, 112 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
