Gates® Power Transmission PowerGrip® 450L075 Light Timing Belt, 3/4 in W, 45 in OAL, 3/8 in Pitch, 120 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053564631
-
Manufacturer Part Number450L075
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width3/4 in
-
Series9257
-
Number of Teeth120
-
Overall Length45 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572215
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® 450L075 Light Timing Belt, 3/4 in W, 45 in OAL, 3/8 in Pitch, 120 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
PIP® 302-0750-OR/S High Visibility Surveyors Vest, S, Hi-Viz Orange, Polyester Mesh, Zipper Closure, 10 Pockets, ANSI Class: Class 2, ANSI 107 Class 2 Type R2
Ideal for construction, municipalities, shipyards, and anywhere hi-visibility apparel is necessary.
Gates® Power Transmission Super HC® PowerBand® 3/3V630 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 63 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Dodge® 126174 211 Medium Duty Non-Expansion Single Lip Flanged Cartridge Ball Bearing Unit, 1-15/16 in Dia Bore, 5.38 in L Bolt Center-to-Center, 5.38 in Dia Bolt Circle, 4-Bolt Base/Piloted Flange Mount, 6.38 in OAL/Dia
Dodge® 126174 211 Medium Duty Non-Expansion Single Lip Flanged Cartridge Ball Bearing Unit, 1-15/16 in Dia Bore, 5.38 in L Bolt Center-to-Center, 5.38 in Dia Bolt Circle, 4-Bolt Base/Piloted Flange Mount, 6.38 in OAL/Dia
Gates® Power Transmission MegaCrimp™ 6MJ-4MP90 G60 SAE to SAE Hydraulic Elbow Adapter, 9/16-18 x 1/4-18 Nominal, 37 deg Male JIC Flare x Male NPTF, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
NON-METAL LIQUIDTITE CONDUIT (FT)-KAF3/8NM >
