HTD Belts
Gates® Power Transmission PowerGrip® GT®3 355-5MGT-09 Synchronous Belt, 9 mm W, 355 mm OAL, 5 mm Pitch, 71 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
Gates® Power Transmission PowerGrip® GT®3 357-3MGT-09 Synchronous Belt, 9 mm W, 357 mm OAL, 3 mm Pitch, 119 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
Gates® Power Transmission PowerGrip® GT®3 3600-8MGT-20 Synchronous Belt, 20 mm W, 3600 mm OAL, 8 mm Pitch, 450 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 3600-8MGT-30 Synchronous Belt, 30 mm W, 3600 mm OAL, 8 mm Pitch, 450 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 3600-8MGT-50 Synchronous Belt, 50 mm W, 3600 mm OAL, 8 mm Pitch, 450 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 3600-8MGT-85 Synchronous Belt, 85 mm W, 3600 mm OAL, 8 mm Pitch, 450 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 375-5MGT-25 Synchronous Belt, 25 mm W, 375 mm OAL, 5 mm Pitch, 75 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
Gates® Power Transmission PowerGrip® GT®3 3850-14MGT-115 Synchronous Belt, 115 mm W, 3850 mm OAL, 14 mm Pitch, 275 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 3850-14MGT-40 Synchronous Belt, 40 mm W, 3850 mm OAL, 14 mm Pitch, 275 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 3850-14MGT-55 Synchronous Belt, 55 mm W, 3850 mm OAL, 14 mm Pitch, 275 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 3850-14MGT-85 Synchronous Belt, 85 mm W, 3850 mm OAL, 14 mm Pitch, 275 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 400-5MGT-25 Synchronous Belt, 25 mm W, 400 mm OAL, 5 mm Pitch, 80 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
Gates® Power Transmission PowerGrip® GT®3 425-5MGT-15 Synchronous Belt, 15 mm W, 425 mm OAL, 5 mm Pitch, 85 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
Gates® Power Transmission PowerGrip® GT®3 4326-14MGT-115 Synchronous Belt, 115 mm W, 4326 mm OAL, 14 mm Pitch, 309 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 4326-14MGT-40 Synchronous Belt, 40 mm W, 4326 mm OAL, 14 mm Pitch, 309 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 4326-14MGT-55 Synchronous Belt, 55 mm W, 4326 mm OAL, 14 mm Pitch, 309 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 4326-14MGT-85 Synchronous Belt, 85 mm W, 4326 mm OAL, 14 mm Pitch, 309 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 450-5MGT-09 Synchronous Belt, 9 mm W, 450 mm OAL, 5 mm Pitch, 90 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
Gates® Power Transmission PowerGrip® GT®3 4578-14MGT-85 Synchronous Belt, 85 mm W, 4578 mm OAL, 14 mm Pitch, 327 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 480-8MGT-12 Synchronous Belt, 12 mm W, 480 mm OAL, 8 mm Pitch, 60 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 480-8MGT-20 Synchronous Belt, 20 mm W, 480 mm OAL, 8 mm Pitch, 60 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 480-8MGT-30 Synchronous Belt, 30 mm W, 480 mm OAL, 8 mm Pitch, 60 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 480-8MGT-50 Synchronous Belt, 50 mm W, 480 mm OAL, 8 mm Pitch, 60 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 480-8MGT-85 Synchronous Belt, 85 mm W, 480 mm OAL, 8 mm Pitch, 60 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 4200-20M-115 Synchronous Belt, 115 mm W, 4200 mm OAL, 20 mm Pitch, 210 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
Gates® Power Transmission PowerGrip® GT®3 960-8MGT-20 Synchronous Belt, 20 mm W, 960 mm OAL, 8 mm Pitch, 120 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 4326-14MGT-40 Synchronous Belt, 40 mm W, 4326 mm OAL, 14 mm Pitch, 309 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® HTD® 460-5M-25 Synchronous Belt, 25 mm W, 460 mm OAL, 5 mm Pitch, 92 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
Gates® Power Transmission PowerGrip® GT®3 800-5MGT-15 Synchronous Belt, 15 mm W, 800 mm OAL, 5 mm Pitch, 160 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
Gates® Power Transmission PowerGrip® HTD® 240-3M-06 Synchronous Belt, 6 mm W, 240 mm OAL, 3 mm Pitch, 80 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
