Liquid Wrench® CERFLON® L616 Grease, 10.25 oz Aerosol Can, Aerosal Spray Form, White
Liquid Wrench® CERFLON® L616 Grease, 10.25 oz Aerosol Can, Aerosal Spray Form, White
-
BrandLiquid Wrench®
-
UPC078698120621
-
Manufacturer Part NumberL616
-
CountryUSA
-
Flammability Rating0.7 to 6%
-
Flash Point104 deg F
-
FormAerosal Spray
-
ColorWhite
-
Composition2-(2-butoxyethoxy) Ethanol, Low Odor Base Solvent, Stoddard Solvent, Carbon Dioxide, Trimethylbenzene
-
VOC Content0.24
-
Container Size10.25 oz
-
Container TypeAerosol Can
-
Base TypeLithium Grease
-
Specific Gravity0.88
- LIQUID WRENCH® White Lithium grease with CERFLON® cuts friction to extend life
- Sprays on easily - sets up as a lubricating grease that will not melt, run, wash off or freeze
- Inhibits corrosion
- Creates long lasting, heavyduty lubrication
- Does not freeze, melt or run
- 50-state compliant
-
UNSPSC15121902
-
Package Description12/CS
-
SDS
-
Catalog
Recently Viewed
Liquid Wrench® CERFLON® L616 Grease, 10.25 oz Aerosol Can, Aerosal Spray Form, White
MARXMAN™ 85036 330QI General Purpose Jobber Length Drill Bit, I Drill - Letter, 0.272 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Self-aligning double row spherical roller bearings are designed to distribute the load over the symmetrical rollers, assuring positive tracking and smooth operation. The large roller complement provides high capacity for radial or combined radial-thrust loads. Osculation clearance at the ends of the rollers compensates for shock loads and prevents destructive edge loading. These precision bearings with double contoured retainer pockets are designed to meet a broad range of application requirements.
Crosby® 1026384 A-323-1/4 Grab Hook, 1/4 in Trade, 3500 lb Load, Eyelet Attachment, Forged Alloy Steel
Crosby® 1026384 A-323 Grab Hook, 1/4 in Trade, 3500 lb Load, Eyelet Attachment, Forged Alloy Steel
Gardner Bender GTF-600N Friction Tape, 60 ft L x 3/4 in W, 15 mil THK, PVC, Black
Gardner Bender GTF-600N Friction Tape, 60 ft L x 3/4 in W, 15 mil THK, PVC, Black
Dichtomatik N4.00X096 O-Ring, 96 mm ID x 104 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
