Koyo B-2414 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 1-1/2 in Dia Bore, 1-7/8 in OD, 1 Row, 7/8 in W, 9780 lb Dynamic/19670 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790211027
-
Manufacturer Part NumberB-2414
-
CountryUSA
-
Load Capacity9780 lb Dynamic/19670 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed2800 rpm Grease/4300 rpm Oil
-
Closure TypeOpen
-
TypeOpen Ends Round Bore Uncaged
-
Width7/8 in
-
SeriesB Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter1-7/8 in
-
Bore Diameter1-1/2 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an "IR" inner ring is required for optimal performance
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Koyo B-2414 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 1-1/2 in Dia Bore, 1-7/8 in OD, 1 Row, 7/8 in W, 9780 lb Dynamic/19670 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
40-BS-24-F-3/4 24-tooth Sprocket For #40
24-TOOTH SPROCKET FOR #40 CHAIN-MAI40BS24F3/4>
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
2" VACUUM SUCTION PVC HOSE >(FT)-SPIGT200 >
16-T SPROCKETS FOR #50 CHAIN-MAI50BS16F7/8>
40-BS-19-F-3/4 19-tooth Sprockets For #40
19-TOOTH SPROCKETS FOR #40 CHAIN-MAI40BS19F3/4>
