Torrington 1"-ID NEEDLE BEARINGS TOR BH-1616
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790215391
-
Manufacturer Part NumberBH-1616
-
CountryUSA
-
Load Capacity8200 lb Dynamic/15830 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed3400 rpm Grease/5200 rpm Oil
-
Closure TypeOpen
-
TypeHeavy Duty Open Ends Uncaged
-
Width1 in
-
SeriesBH Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter1-5/16 in
-
Bore Diameter1 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
6-S-1.3/16 1-3/16"-ID S-flex Coupling Halfs-lov6s1.
1-3/16"-ID S-FLEX COUPLING HALFS-LOV6S1.3/16>
Proto® J4996 Ball Style Long Arm Hex Key Set, Metric, 9 Pieces, 1.5 to 10 mm Hex, L-Handle Handle, Alloy Steel, Black Oxide
Dichtomatik S70011 O-Ring, 011 Dash Number, 0.301 in ID x 0.441 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
8" X 1/2" X 1-1/4" GRINDING WHEEL-CRB09839 >
BBI 087457 Partially Threaded Cap Screw, 5/8-11, 7-1/2 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087457 Partially Threaded Cap Screw, 5/8-11, 7-1/2 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
