Crosby® 1030850 HG-225-3/4 X 12 Turnbuckle, Hook/Eye, 3/4 in Thread, 3000 lb Working, 12 in Take Up, 24.85 in L Close, Steel
Crosby® 1030850 HG-225 Turnbuckle, Hook/Eye, 3/4 in Thread, 3000 lb Working, 12 in Take Up, 24.85 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1030850
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter3/4 in
-
MaterialSteel
-
Closed Length24.85 in
-
SeriesHG-225
-
Working Load3000 lb
-
End/EndHook/Eye
-
Take Up12 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
- For turnbuckles size 1/4 in through 1 in, a shackle one size smaller can be reeved through eye
- Turnbuckle hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 6|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1030850 HG-225-3/4 X 12 Turnbuckle, Hook/Eye, 3/4 in Thread, 3000 lb Working, 12 in Take Up, 24.85 in L Close, Steel
Crosby® 1030850 HG-225 Turnbuckle, Hook/Eye, 3/4 in Thread, 3000 lb Working, 12 in Take Up, 24.85 in L Close, Steel
5-GROOVE BANDED 5-V-2800 V-BELT - JAS5R5V2800>
Bosch 688-01 Cut Off Wheel Cutting Kit, 0.032 in Kerf, 35000 rpm Speed
Bosch 688-01 Cut Off Wheel Cutting Kit, 0.032 in Kerf, 35000 rpm Speed
15-WATT FLUORESCENT BULBS-BULF152T8SP35>
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
