Torrington 1-3/8"-ID NEEDLE BEARINGS TOR B-2216
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790194092
-
Manufacturer Part NumberB-2216
-
CountryUSA
-
Load Capacity90300 lb Dynamic/22900 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed2100 rpm Grease/3200 rpm Oil
-
Closure TypeOpen
-
TypeOpen Ends Round Bore Uncaged
-
Width1 in
-
SeriesB Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter1-5/8 in
-
Bore Diameter1-3/8 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Campbell® T7616702 Round Swiveling Eye Bolt Snap, 3/8 in, 2-11/16 in OAL, 3/8 in ID Eye, 50 lb Load, Nickel Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Kuri Tec®KLEARON™ K010-1216x100 Tubing, 3/4 in Nominal, 100 ft L, 35 psi Working, PVC, Domestic
Jones Stephensâ„¢ P21150 Provent, 1-1/2 in MNPT, ABS
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
3" X 21" 80 GRIT SANDING BELT-JWH353116 >
