Torrington 1-1/8"-ID NEEDLE BEARINGS TOR HJ-182616
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
-
BrandKoyo
-
UPC605790195150
-
Manufacturer Part NumberHJ-182616
-
CountryUSA
-
Load Capacity8170 lbf Dynamic/12100 lbf Static
-
Cage MaterialSteel
-
Temperature Rating250 deg F
-
Maximum Speed10000 rpm Grease/16000 rpm Oil
-
Closure TypeOpen
-
TypeCaged Heavy Duty
-
Width1 in
-
SeriesHJ Inch Series
-
Outside Diameter1-5/8 in
-
Bore Diameter1-1/8 in
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Without inner ring
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 779KD9 |
-
Alternative Part NumberHJ182616PBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.1|ASTM F2246|Military Standard MS 51961
-
Catalog
Recently Viewed
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
NIBCO 76-103-01 2-Piece Standard Configuration Ball Valve, 1/2 in Nominal, FNPT End Style, 250 lb, Stainless Steel Body, Standard Port, MPTFE/PTFE Softgoods, Domestic
Apolloâ„¢ 7610301A 76-100 2-Piece Standard Configuration Ball Valve, 1/2 in Nominal, FNPT End Style, 250 lb, Stainless Steel Body, Standard Port, MPTFE/PTFE Softgoods, Domestic
BBI 455030 Partially Threaded Cap Screw, 1/4-20, 4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455030 Partially Threaded Cap Screw, 1/4-20, 4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
The 2863 M18™ FUEL™ w/ONE-KEY™ high torque 1/2 in. impact wrench with friction ring provides the most powerful, most compact, and the most repeatable impact wrench in the industry! The POWERSTATE™ brushless motor delivers up to 1,000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque, providing users a cordless solution that will eliminate the need for corded impact wrenches. The industry’s most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. REDLINK Plus™ intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery. Compatible with one-key, this is the industry’s first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a tool’s performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONE-KEY™, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool’s memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time.
3" X 4' POLY SKIMMER SOCKS--BALE OF 12-FIRFFOPSS3412 >
Gardner Bender PS-150 UV-Resistant Electrical Staple, 10 AWG, 12 AWG, 14 AWG Cable, Plastic
These polyethylene staples with zinc plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
