McGill® 0002800000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-3/4 in ID x 2.2489 in OD, 1.76 in OAW, For Use With CAGEROL® MR 36 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000530
-
Manufacturer Part Number0002800000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeStandard
-
SeriesMI Series
-
Inside Diameter1-3/4 in
-
Outside Diameter2.2489 in
-
Bore TypeRound/Spherical
-
Overall Width1.76 in
-
Suitable For Use WithCAGEROL® MR 36 Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 28
-
UNSPSC31171500
-
Standards/ApprovalsMS 500072-25
-
Package DescriptionEACH
-
Catalog
-
Specification Sheet
Recently Viewed
McGill® 0002800000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-3/4 in ID x 2.2489 in OD, 1.76 in OAW, For Use With CAGEROL® MR 36 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Browning® 3749231 Taper Lock Bushing, 5/8 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Browning® 3749231 Taper Lock Bushing, 5/8 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
BBI 101543 Socket Set Screw, 7/16-20, 1/2 in L, Cup Point, Alloy Steel
This brushless small angle grinder requires no time changing brushes and offers a longer motor life. It offers a high level of protection. Its break stops the wheel in 2 sec or less. The kickback break engages maximum force to stop the wheel when there is a pinch, stall or bind up to reduce kickback. The grinder will also shut off in those events to further protect the user.
