McGill® 0001800000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-1/8 in ID x 1.3741 in OD, 1.26 in OAW, For Use With GUIDEROL® GR 22, CAGEROL® MR 22 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000264
-
Manufacturer Part Number0001800000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeStandard
-
SeriesMI Series
-
Inside Diameter1-1/8 in
-
Outside Diameter1.3741 in
-
Bore TypeRound/Spherical
-
Overall Width1.26 in
-
Suitable For Use WithGUIDEROL® GR 22, CAGEROL® MR 22 Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 18
-
UNSPSC31171500
-
Standards/ApprovalsMS 51962-13
-
Specification Sheet
-
Catalog
Recently Viewed
McGill® 0001800000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-1/8 in ID x 1.3741 in OD, 1.26 in OAW, For Use With GUIDEROL® GR 22, CAGEROL® MR 22 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
IKO IRB4016 Inch Series Inner Ring, 2-1/2 in ID x 2-3/4 in OD, 25.78 mm OAW, For Use With BA4416Z Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
McGill® 0002564000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-9/16 in ID x 1.874 in OD, 1.26 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
