ISOSTATIC™ Oilube® 401172 Round Bore Sleeve Bearing, 9/16 in Dia Bore, 3/4 in OD, 1 in W
ISOSTATIC™ Oilube® 401172 Round Bore Sleeve Bearing, 9/16 in Dia Bore, 3/4 in OD, 1 in W
-
BrandISOSTATIC™
-
UPC846802044671
-
Manufacturer Part Number401172
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter3/4 in
-
Bore Diameter9/16 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-1824-16
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401172 Round Bore Sleeve Bearing, 9/16 in Dia Bore, 3/4 in OD, 1 in W
ISOSTATIC™ Oilube® 401172 Round Bore Sleeve Bearing, 9/16 in Dia Bore, 3/4 in OD, 1 in W
Duracell® MN1500B2 Alkaline Battery, Zinc-Manganese Dioxide, 1.5 V DC V Nominal, 2850 mAh Nominal, AA
Duracell® MN1500B2 Alkaline Battery, Zinc-Manganese Dioxide, 1.5 VDC V Nominal, 2850 mAh Nominal, AA
ISOSTATIC™ Century® 104243 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 3 in W
ISOSTATIC™ Century® 104243 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 3 in W
JACKSON SAFETY® 14811 C10 Lightweight Bump Cap, Universal, White, HDPE, 4-Point Pinlock Suspension, ANSI Specified
Jackson Safety* C10 bump caps can help provide on the job protection your workers. They help offer protection from minor bumps and scalp lacerations (where ANSI standards are not required). These lightweight safety hats are made of molded HDPE (high density polyethylene) and feature a 4-point suspension system with an absorbent brow pad. The pinlock sizing system can accommodate head sizes 6.5 to 8.25 and the helmets can be made compatible with a face shield for additional coverage.
Lenox® 12247 Arbored Hole Saw, 3-5/8 in Dia, HSS/Bi-Metal Cutting Edge
SPIN-ON OIL FILTERS
