ISOSTATIC™ Oilube® 401182 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 3/4 in OD, 3/4 in W
ISOSTATIC™ Oilube® 401182 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 3/4 in OD, 3/4 in W
-
BrandISOSTATIC™
-
UPC846802044770
-
Manufacturer Part Number401182
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width3/4 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter3/4 in
-
Bore Diameter5/8 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-2024-12
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401182 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 3/4 in OD, 3/4 in W
ISOSTATIC™ Oilube® 401182 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 3/4 in OD, 3/4 in W
WERNER® D6220-2 D6200-2 Flat D-Rung Extension Ladder, 20 ft OAL, ANSI Code: A14.5, 300 lb Load, Fiberglass, 12 in Adjustable Increments
The D6220-2 two section fiberglass extension ladder has non-conductive rails making this ladder Ideal for working near electricity. With a duty rating of 300 pounds, the D6220-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
WERNER® 7108-1 7100-1 Type IAA Duty Single Section Straight Ladder, 8 ft H x 18-1/16 in W, 375 lb Load, 8 ft Top Step, Fiberglass
The 7108-1 one section round rung 8 ft straight ladder is made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 375 lb making them durable and long lasting. The slip resistant, TRACTION-TRED® rungs are round, and the durable rail shields and shoe brackets help to protect the rails from damage. The plate and rung assemblies are riveted at four points to the side rails.
24 MAGNETIC FLOOR SWEEPER-JWH362670 >
12-VOLT DC AUTOMOTIVE BULBS-BUL1157 >
AUTOMOTIVE BULBS USED FOR AUTO STOP
