FED/Bronze 1-3/4" X 2-1/8" X 1-1/2" BUSHINGS FEB SS-56-68-24
ISOSTATIC™ Oilube® 401510 Round Bore Sleeve Bearing, 1-3/4 in Dia Bore, 2-1/8 in OD, 1-1/2 in W
-
BrandISOSTATIC™
-
UPC846802048044
-
Manufacturer Part Number401510
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1-1/2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter2-1/8 in
-
Bore Diameter1-3/4 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-5668-24
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 401510 Round Bore Sleeve Bearing, 1-3/4 in Dia Bore, 2-1/8 in OD, 1-1/2 in W
Reed 03665 Replacement Cutter Wheel, 1/4 in Blade Exposure, For Use With Quick Release™ TC3Q, TC4Q, TC5Q, TC6Q and TC8Q Metal Tubing Cutter
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
250-watt quartz metal halide HID light bulb commonly used for commercial spaces, streetlights, and parking lots. It operates on an ANSI M58 ballast and features a universal burn position, allowing it to be installed horizontally or vertically.
Leviton® 84025 Standard Size Blank Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, 430 Stainless Steel
FED/Bronze 1-3/4" X 2" X 2-1/2" BRONZEBUSHING FEB SS-56-64-40
ISOSTATIC™ Oilube® 401507 Round Bore Sleeve Bearing, 1-3/4 in Dia Bore, 2 in OD, 2-1/2 in W
