ISOSTATIC™ Century® 104079 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 3/4 in OD, 2 in W
ISOSTATIC™ Century® 104079 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 3/4 in OD, 2 in W
-
BrandISOSTATIC™
-
UPC846802013882
-
Manufacturer Part Number104079
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width2 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter3/4 in
-
Bore Diameter1/2 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-0812-16
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Century® 104079 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 3/4 in OD, 2 in W
ISOSTATIC™ Century® 104079 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 3/4 in OD, 2 in W
10-LBS #6013-1/8" WELDING RODS General-purpose welding rod is ideal for light gauge metal, sheet metal, duct work
ROLLER COVERS FOR POWER ROLLERS-JWH770949>
Coilhose® PE0610-100K Tubing, 4 mm ID x 6 mm OD x 100 ft L x 1 mm THK Wall, Polyethylene
Polyethylene is one of the most popular choices for low pressure tubing due to its resistance to most chemicals and solvents, good flexibility and economical cost. Our PE Tubing is manufactured from high quality resins and extruded to close tolerances. We offer five popular sizes. Compatible with Coilock Fittings and Poly-Tube Fittings.
NYLON INSULATED WIRE TERMINAL (EA)-MMM1314SNB >
Browning® 765303 VER 200 Standard-Duty Straight Bore Ball Bearing Insert With Seal Flinger and Snap Ring, 1.688 in Dia Bore, 3.594 in OD, 1 Rows, 1.938 in W, 7901 lb Dynamic/5139 lb Static Load
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
