Sealmaster® 700069 Medium Duty Non-Expansion Straight Bore Ball Bearing Insert, 1 in Dia Bore, 2.4409 in OD, 1-1/2 in W, 4381 lb Dynamic/2567 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000601
-
Manufacturer Part Number700069
-
CountryUSA
-
Load Capacity4381 lb Dynamic/2567 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed5450 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width1-1/2 in
-
Bearing MaterialSteel
-
Outside Diameter2.4409 in
-
Bore Diameter1 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number3-1
-
UNSPSC31171537
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® 700069 Medium Duty Non-Expansion Straight Bore Ball Bearing Insert, 1 in Dia Bore, 2.4409 in OD, 1-1/2 in W, 4381 lb Dynamic/2567 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Coilhose® PR14-10B-B Flexcoil PR14 Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Reusable Swivel End Style, 10 ft L, 125 psi at 75 deg F Working, 95A Polyurethane, Domestic
Flexcoil is the finest polyurethane air hose on the market today and eliminates the two most common limitations of other self-storing air hoses: kinking and abrasion. This lightweight, yet extremely durable hose will withstand the rigors of tough industrial environments while maintaining its resiliency over a long period of time. Swivel fitting is provided with thread seal, eliminating the need for sealing tape or paste.
Dichtomatik N70331 O-Ring, 331 Dash Number, 2.225 in ID x 2.645 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ISOSTATIC™ Oilube® 101078 Round Bore Sleeve Bearing, 1/4 in Dia Bore, 7/16 in OD, 1/2 in W
ISOSTATIC™ Oilube® 101078 Round Bore Sleeve Bearing, 1/4 in Dia Bore, 7/16 in OD, 1/2 in W
1/2" DIAMETERX1" DOWEL PIN-HOL01126 >
ISOSTATIC™ Oilube® 401097 Round Bore Sleeve Bearing, 3/8 in Dia Bore, 5/8 in OD, 1-1/4 in W
ISOSTATIC™ Oilube® 401097 Round Bore Sleeve Bearing, 3/8 in Dia Bore, 5/8 in OD, 1-1/4 in W
