ISOSTATIC™ Oilube® 401162 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 1 in OD, 1 in W
ISOSTATIC™ Oilube® 401162 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 1 in OD, 1 in W
-
BrandISOSTATIC™
-
UPC846802044572
-
Manufacturer Part Number401162
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1 in
-
Bore Diameter1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-1632-16
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401162 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 1 in OD, 1 in W
ISOSTATIC™ Oilube® 401162 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 1 in OD, 1 in W
3.5A ECONOMY VARIABLE SPEED ELECTRIC JIGSAW - JWH311317>
The DWE43114 4-1/2 in (115 mm)/5 in (125 mm) high performance cut-off/grinder with E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor Dust Ejection System™ technology clears dust and debris for extra protection power tool shuts off before overheating with Power-Off® advanced overload protection.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
#8 X 1-1/2" Pan Head Combo Sheet Metal Screws
LIGHT BULB KEY SOCKET-JWH513643 >
