FED/Bronze 1/2" X 1" X 1-1/2" BRONZE BUSHINGS FEB SS-16-32-24
ISOSTATIC™ Oilube® 401163 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 1 in OD, 1-1/2 in W
-
BrandISOSTATIC™
-
UPC846802044589
-
Manufacturer Part Number401163
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1-1/2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1 in
-
Bore Diameter1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-1632-24
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401163 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 1 in OD, 1-1/2 in W
Drillco 200LH21 Left Hand Cut Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Uncoated
200LH drills are used in close center multiple spindle gear driven drilling heads, where adjacent spindles operate alternately left and right hand. They are also used in left hand screw machines. Can be used to drill out broken bolts.
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
FHP V-BELTS-PIX3L140>
SIZE-2 PROPANE CUTTING TIP-FOR30140 >
72892 Cup Brush, Cable Crimped Wire, Industrial Pro, 4" X .009 Wire With 5/8" -11 M14x2.0 Arbor And Protective
CUP BRUSH, CABLE CRIMPED WIRE, INDUSTRIAL PRO, 4" X .009 WIRE WITH 5/8" -11 M14X2.0 ARBOR AND PROTECTIVE GUARD-FOR72892 >
