ISOSTATIC™ Oilube® 402064 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 3/4 in W, 1 in Dia Flange
ISOSTATIC™ Oilube® 402064 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 3/4 in W, 1 in Dia Flange
-
BrandISOSTATIC™
-
UPC846802049348
-
Manufacturer Part Number402064
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Flange Diameter1 in
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width3/4 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter3/4 in
-
Bore Diameter5/8 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSF-2024-12
-
UNSPSC31171501
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 402064 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 3/4 in W, 1 in Dia Flange
ISOSTATIC™ Oilube® 402064 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 3/4 in W, 1 in Dia Flange
FYH® ER210 31 ER Series Cylindrical Ball Bearing Insert, 1-15/16 in Dia Bore, 3.54 in OD, 2.03 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® ER210 31 ER Series Cylindrical Ball Bearing Insert, 1-15/16 in Dia Bore, 3.54 in OD, 2.03 in W, 35.1 kN Dynamic/23.3 kN Static Load
Dichtomatik 75189227 O-Ring, 19 mm ID x 24 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ISOSTATIC™ Oilube® 401077 Round Bore Sleeve Bearing, 3/8 in Dia Bore, 1/2 in OD, 1/2 in W
ISOSTATIC™ Oilube® 401077 Round Bore Sleeve Bearing, 3/8 in Dia Bore, 1/2 in OD, 1/2 in W
5/16" X 3" USS S/H CAPSCREW - HOL72144 >
ISOSTATIC™ Oilube® 302033 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 1/2 in W, 7/8 in Dia Flange
ISOSTATIC™ Oilube® 302033 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 1/2 in W, 7/8 in Dia Flange
