ISOSTATIC™ Oilube® 402013 Round Bore Flange Bearing, 1/4 in Dia Bore, 3/8 in OD, 3/4 in W, 15/32 in Dia Flange
ISOSTATIC™ Oilube® 402013 Round Bore Flange Bearing, 1/4 in Dia Bore, 3/8 in OD, 3/4 in W, 15/32 in Dia Flange
-
BrandISOSTATIC™
-
UPC846802048839
-
Manufacturer Part Number402013
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Flange Diameter15/32 in
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width3/4 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter3/8 in
-
Bore Diameter1/4 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSF-812-12
-
UNSPSC31171501
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 402013 Round Bore Flange Bearing, 1/4 in Dia Bore, 3/8 in OD, 3/4 in W, 15/32 in Dia Flange
ISOSTATIC™ Oilube® 402013 Round Bore Flange Bearing, 1/4 in Dia Bore, 3/8 in OD, 3/4 in W, 15/32 in Dia Flange
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Crosby® 1043472 G-291-5/8 X 4 Eye Bolt With Regular Nut, 5/8 in, 4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043472 G-291 Eye Bolt With Regular Nut, 5/8 in, 4 in L Shank, Forged Steel, Hot Dipped Galvanized
2-1/2 GALLON DEF. DIESEL EXHAUST FLUID
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
OFFSET BOTTOM KEEPS THE TUB OFF THE GROUND. DESIGNED FOR BOTH DECORATIVE AND FUNTIONAL USE. FORTIFIED AGAINST RODENTS, ENSURING YOUR STORED CONTENTS REMAIN SECURE
JWH610224 >
