Sealmaster 2"-ID 2-BOLT TRB PILLOW BLOCK UNIT SEA RPB-200-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
-
BrandSealmaster®
-
UPC662288480006
-
Manufacturer Part Number550214
-
CountryUSA
-
Load Capacity8070 lb Dynamic
-
Locking DeviceDouble Set Screw
-
Temperature Rating250 deg F
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed2500 rpm
-
TypeStandard-Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeFelt
-
SeriesRPB
-
Base Width2-7/16 in
-
Base to Bore Centerline2-1/4 in
-
Bolt Center-to-Center Length6-5/16 to 7-3/16 in
-
Bore Diameter2 in
-
Bore TypeRound/Tapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4-5/8 in
-
Overall Length8-7/8 in
-
Overall Width3-1/2 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt split cast iron housing
- Powder coat epoxy 2-bolt split cast iron housing
-
Alternative Part NumberRPB-200-2
-
UNSPSC31171511
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Certified
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 2"-ID 2-BOLT TRB PILLOW BLOCK UNIT SEA RPB-200-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
ISOSTATIC™ Oilube® 401392 Round Bore Sleeve Bearing, 1-3/16 in Dia Bore, 1-1/2 in OD, 2 in W
ISOSTATIC™ Oilube® 401392 Round Bore Sleeve Bearing, 1-3/16 in Dia Bore, 1-1/2 in OD, 2 in W
The high Performance™ metal grinding wheel is a professional solution for a range of grinding applications. The grinding wheel is made with tested high Performance™ aluminum oxide for long-life and high material removal and full sheets of fiberglass for durability and safety. DeWALT® developed a proprietary material mix to maximize the wheel's lifespan and help you minimize tool replacement costs. With a high grain concentration, you are assured of aggressive grinding action and smoother running wheels, no matter what the job.
#A-2060 ROLLER CHAIN OFFSET LINKS-ROLA2060OL >
Weiler® 17641 Conflex Wheel Brush, 3 in Dia Brush, 1/2 in W Face, 0.0118 in Dia Crimped Filament/Wire
Weiler® 17641 Conflex Wheel Brush, 3 in Dia Brush, 1/2 in W Face, 0.0118 in Dia Crimped Filament/Wire
CRC® 03017 Flammable Gasket Remover, 16 oz Aerosol Can, Liquid/Viscous Form, Light Gray, Solvent Odor/Scent
Removes baked on fiber gaskets, gasket adhesives and sealants. Dissolves and aids removal of paints, lacquers, adhesives, and varnish. Contains no methylene chloride.
