Dodge® 070365 515/534 Type S2000 Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® 070365 515/534 Type S2000 Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL x 5.59 in OAH
-
BrandDodge®
-
UPC782475305971
-
Manufacturer Part Number070365
-
CountryUSA
-
Load Capacity39000 lb Dynamic/47500 lb Static
-
Locking DeviceSpringlok™ Concentric Collar
-
Temperature Rating-100 to 200 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed1740 rpm
-
TypeType S2000
-
Mounting TypeFour-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Series515/534
-
Base Width3.38 in
-
Base to Bore Centerline2-3/4 in
-
Bolt Center-to-Center Length6.94 to 7.31 in
-
Bore Diameter2-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5.59 in
-
Overall Length9-1/4 in
-
Overall Width3.2 in
- More contact area
- Expansion capability up to 3/8 in
- Larger rollers
- High-capacity double row spherical rollers
- Case-carburized inner rings resist cracking
- Factory sealed, lubed, and adjusted
- Permits static or dynamic misalignment up to +/- 1 deg
- Flinger to shield seal and bearing from contamination/damage
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100940978 |
| Motion Industries | 07547561 |
-
Alternative Part Number70365|P4B-S2-207R
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Specification Sheet
-
Line Drawing
-
Catalog
-
Line Drawing
Recently Viewed
Dodge® 070365 515/534 Type S2000 Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® 070365 515/534 Type S2000 Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL x 5.59 in OAH
1/2 in. trigger speed control reversing. 7.0 amp Milwaukee built motor. Helical cut, heat treated gears with durable, glass reinforced nylon handle. Reversing with all ball and roller bearings. Right angle drill features head and handle swivel 360 deg., can be locked tight in any position. Kit includes tool, open end wrench, 3/16 in. socket wrench, chuck remover bar, side handle and impact resistant carrying case.
The D6212-1 ladders are one section straight ladders made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 300 lb making them durable and long lasting. The TRACTION-TRED® D-rungs are slip resistant, and the durable rail shields and shoe brackets help to protect the rails from damage. The dual action feet pivot for use on hard or penetrable surfaces.
1-1/4" -ID INSERT BEARING-FAF1104KRR >
5/16"-ID NEEDLE BEARING TORB59>
1-VL-033-3/4 1-grv Variable Pitch Sheaves
1-GRV VARIABLE PITCH SHEAVES -1VL0443/4 >
