Dodge® 023006 111 Type E-Xtra Pillow Block Roller Bearing Unit, 1-11/16 in Dia Bore, 6.13 to 6.38 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7.88 in OAL x 4-1/4 in OAH
Dodge® 023006 111 Type E-Xtra Pillow Block Roller Bearing Unit, 1-11/16 in Dia Bore, 6.13 to 6.38 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7.88 in OAL x 4-1/4 in OAH
-
BrandDodge®
-
UPC782475696048
-
Manufacturer Part Number023006
-
CountryUSA
-
Load Capacity7070 lb Dynamic/33000 lb Static
-
Locking Device65 deg Set Screw
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed3320 rpm
-
TypeType E-Xtra
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Series111
-
Base Width2.38 in
-
Base to Bore Centerline2.13 in
-
Bolt Center-to-Center Length6.13 to 6.38 in
-
Bore Diameter1-11/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4-1/4 in
-
Overall Length7.88 in
-
Overall Width3.38 in
- Factory assembled, adjusted and prelubricated
- Case hardened rollers and races
- Easy installation and maintenance
- Triple rubber lip contacting seals
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00570278 |
| Applied Industrial Technologies | 100738669 |
-
Alternative Part NumberP2B-E-111R
-
UNSPSC31171516
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
Specification Sheet
-
Owners/User Manual
-
Catalog
-
Line Drawing
-
Instruction/Installation Manual
Recently Viewed
Dodge® 023006 111 Type E-Xtra Pillow Block Roller Bearing Unit, 1-11/16 in Dia Bore, 6.13 to 6.38 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7.88 in OAL x 4-1/4 in OAH
Dodge® 023006 111 Type E-Xtra Pillow Block Roller Bearing Unit, 1-11/16 in Dia Bore, 6.13 to 6.38 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7.88 in OAL x 4-1/4 in OAH
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
RBC® IR8407 Pitchlign® Heavy Duty Inner Ring, 1-3/4 in ID x 2-1/4 in OD, 1.76 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
JASON 3L280 Replacement Drive Belt 3/8" x 28" Fits Jason Industrial Outdoor Power Equipment for Drive Systems and Outdoor Machinery
JASON® 3L280 V-Belt, 3L Section, 3/8 in W Top, 28 in L Outside, 7/32 in THK
WATTS® 0002220 1L Series Self-Closing Temperature and Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 125 psi Pressure, 210 deg F, Bronze Body
This 1/2 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. It features a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, 2 inch short thermostat with special thermo-bonded coating and test lever. It is CSA listed. Temperature relief at 210 degrees F (99 degree C), pressure relief range is 75 to 150 psi. The standard pressure settings is 125 psi.
