LEVITON SINGLE-EYE ELECTRICAL SUPPORT GRIP LEV L-7986
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
-
BrandLeviton®
-
UPC078477973431
-
Manufacturer Part NumberL7986
-
CountryUSA
-
Cable Size0.82 to 1 in
-
FinishTiN Coated
-
MaterialBronze
-
TypeBus Drop Duty Closed Single Weave Single U Eye
-
Breaking Strength1900 lb
-
Mesh Length8.5 in
- Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today's demanding wire mesh applications
- Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
- Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
-
Alternative Part Number7358581
-
UNSPSC39131607
-
IDEA Index ID7358581
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified
-
Warranty2 years Limited
-
Specification Sheet
Recently Viewed
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
RBC® IR8407 Pitchlign® Heavy Duty Inner Ring, 1-3/4 in ID x 2-1/4 in OD, 1.76 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
JASON 3L280 Replacement Drive Belt 3/8" x 28" Fits Jason Industrial Outdoor Power Equipment for Drive Systems and Outdoor Machinery
JASON® 3L280 V-Belt, 3L Section, 3/8 in W Top, 28 in L Outside, 7/32 in THK
WATTS® 0002220 1L Series Self-Closing Temperature and Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 125 psi Pressure, 210 deg F, Bronze Body
This 1/2 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. It features a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, 2 inch short thermostat with special thermo-bonded coating and test lever. It is CSA listed. Temperature relief at 210 degrees F (99 degree C), pressure relief range is 75 to 150 psi. The standard pressure settings is 125 psi.
Pine-Sol® 40272 All Purpose Cleaner, 48 oz Bottle, Lemon Odor/Scent, Clear, Liquid Form
V-BELTOUTSIDE CIRCUMFERENCE 60."-JAS3V600 >
