Sealmaster 1-1/2"-ID 2-BOLT TRB PILLOW BLOCKS SEA RPB-108-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
-
BrandSealmaster®
-
UPC662288479956
-
Manufacturer Part Number550208
-
CountryUSA
-
Load Capacity6140 lb Dynamic
-
Locking DeviceDouble Set Screw
-
Temperature Rating250 deg F
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed3000 rpm
-
TypeStandard-Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeFelt
-
SeriesRPB
-
Base Width2-5/16 in
-
Base to Bore Centerline2-1/8 in
-
Bolt Center-to-Center Length5-9/16 to 6-7/16 in
-
Bore Diameter1-1/2 in
-
Bore TypeRound/Tapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4-3/8 in
-
Overall Length7-3/4 in
-
Overall Width3-3/8 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt split cast iron housing
- Powder coat epoxy 2-bolt split cast iron housing
-
Alternative Part NumberRPB-108-2
-
UNSPSC31171511
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Certified
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 1-1/2"-ID 2-BOLT TRB PILLOW BLOCKS SEA RPB-108-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
Dichtomatik 75102017 O-Ring, 022 Dash Number, 0.989 in ID x 1.129 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
HCI Preferred Supplier 38975BA Air Brake Tubing, 50 ft L, 0.092 in THK Wall, Nylon
HCI Preferred Supplier 38975BA Air Brake Tubing, 50 ft L, 0.092 in THK Wall, Nylon
48 175# UV/BLACK CABLE TIES--BAG OF 50-CTE48175UV50 >
Diablo® DS0608CF3 Reciprocating Saw Blade, 6 in L, 8 TPI
Enerpac® RC-506 DUO General Purpose Single Acting Hydraulic Cylinder, 50 ton Capacity, 3-3/4 in Dia Bore, 6-1/4 in L Stroke, 11.13 in H Retract, 3-3/4 in Dia Rod, 700 bar
Enerpac® RC-506 DUO General Purpose Single Acting Hydraulic Cylinder, 50 ton Capacity, 3-3/4 in Dia Bore, 6-1/4 in L Stroke, 11.13 in H Retract, 3-3/4 in Dia Rod, 700 bar
