Dodge® 123815 208 Normal Duty Pillow Block Ball Bearing Unit, 1-5/8 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-1/4 in OAL x 4.19 in OAH
Dodge® 123815 208 Normal Duty Pillow Block Ball Bearing Unit, 1-5/8 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-1/4 in OAL x 4.19 in OAH
-
BrandDodge®
-
UPC782475113934
-
Manufacturer Part Number123815
-
CountryUSA
-
Load Capacity7332 lb Dynamic/4475 lb Static
-
Locking DeviceSet Screw
-
Temperature Rating225 to 400 deg F
-
FinishPowder Coated
-
MaterialSteel
-
TypeNormal Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series208
-
Base Width1.93 in
-
Base to Bore Centerline2-1/8 in
-
Bolt Center-to-Center Length5.18 to 5.88 in
-
Bore Diameter1-5/8 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4.19 in
-
Overall Length7-1/4 in
-
Overall Width1-15/16 in
- Normal duty wide inner ring
- Stronger and more flexible cage
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100939321 |
| Motion Industries | 00557293 |
-
Alternative Part NumberP2B-SC-110
-
UNSPSC31171504
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Specification Sheet
-
Owners/User Manual
-
Warranty Information
-
Catalog
Recently Viewed
Dodge® 123815 208 Normal Duty Pillow Block Ball Bearing Unit, 1-5/8 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-1/4 in OAL x 4.19 in OAH
Dodge® 123815 208 Normal Duty Pillow Block Ball Bearing Unit, 1-5/8 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-1/4 in OAL x 4.19 in OAH
Precision Brand® 16AN20 Flat Sheet Shim Stock, 1008-1010 Full Hard Steel, 18 in L x 6 in W x 0.02 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
SURFACE MOUNT TELEPHONE JACK-JWH519059 >
1-QT RUS-KIL PASTEL BASE-BLP14205QT >
Precision Brand® 16A4 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.004 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Sealmaster® 701863 MP Series Medium Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 5 to 6-3/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 8 in OAL x 4-3/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
