FYH® UCP207 20NP UCP Normal Duty Pillow Block Unit, 1-1/4 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
FYH® UCP207 20NP UCP Normal Duty Pillow Block Unit, 1-1/4 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
-
BrandFYH®
-
Manufacturer Part NumberUCP207 20NP
-
CountryUSA
-
Load Capacity25.7 kN Dynamic/15.4 kN Static
-
Locking DeviceSet Screw
-
MaterialCast Iron
-
TypeNormal Duty
-
SeriesUCP
-
Base Width1-7/8 in
-
Base to Bore Centerline1-7/8 in
-
Bolt Center-to-Center Length5 in
-
Bore Diameter1-1/4 in
-
Bore TypeCylindrical
-
Overall Height3-3/4 in
-
Overall Length6-9/16 in
-
Overall Width1-7/8 in
Recently Viewed
FYH® UCP207 20NP UCP Normal Duty Pillow Block Unit, 1-1/4 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
FYH® UCP207 20NP UCP Normal Duty Pillow Block Unit, 1-1/4 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
Sealmaster® 700409 SEHB Non-Expansion Standard-Duty Hanger Ball Bearing Unit, 2 in Dia Bore, 4-3/8 in OD, 2-1/32 in W, Cast Iron Bearing, Set Screw Collar Locking
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
Leviton® S701-GY Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, Steel, Gray
Leviton® S701-GY Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, Steel, Gray
8-MM X 1.25X10-MM STAINLESS STEEL CAPSCREW-MET93308010SS >
Crosby® 1016439 G-403 Jaw End Swivel, 2250 lb Load, 3/8 in Trade, Forged Steel, 0.94 in, 1.06 in x 1.25 in, 0.63 in Eye
Crosby® 1016439 G-403 Jaw End Swivel, 2250 lb Load, 3/8 in Trade, Forged Steel, 0.94 in, 1.06 in x 1.25 in, 0.63 in Eye
FYH® UCP206 30MM UCP Normal Duty Pillow Block Unit, 30 mm Dia Bore, 4-3/4 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 6-1/2 in OAL 3-1/16 in OAH
FYH® UCP206 30MM UCP Normal Duty Pillow Block Unit, 30 mm Dia Bore, 4-3/4 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 6-1/2 in OAL 3-1/16 in OAH
