Browning® 765346 VER 200 Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger and Snap Ring, 2.438 in Dia Bore, 4.594 in OD, 1 Rows, 2.563 in W, 11789 lb Dynamic/8150 lb Static Load
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289859771
-
Manufacturer Part Number765346
-
CountryUSA
-
Load Capacity11789 lb Dynamic/8150 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2500 rpm
-
Closure TypeDouble Seal
-
TypeStandard Duty Straight Bore
-
Seal MaterialRubber
-
Width2.563 in
-
SeriesVER 200
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter4.594 in
-
Bore Diameter2.438 in
- Single setscrew locking
- Single lip contact seal
- Zone hardened inner race
- Browning® VER bearings have the part number laser marked on the inner ring for easy verification of the part number during installation and for replacement
- Cylindrical outer diameter
- Relube through groove in outer diameter
-
Alternative Part NumberVER-239
-
UNSPSC31171504
-
Warranty1 Year
-
Package DescriptionEACH
-
Warranty Information
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning® 765346 VER 200 Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger and Snap Ring, 2.438 in Dia Bore, 4.594 in OD, 1 Rows, 2.563 in W, 11789 lb Dynamic/8150 lb Static Load
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
The Crosby G-209 3/16" is a high-quality screw pin anchor shackle manufactured by Kito Crosby. This industry-standard hardware piece is forged, quenched, and tempered from high-strength carbon steel, featuring a distinct alloy steel "Red Pin" for quick identity confirmation. It is specifically built for quick, temporary connections in dynamic overhead lifting, tie-down, towing, or suspension environments.
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
BBI 400018 Partially Threaded Cap Screw, 1/4-20, 2 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400018 Partially Threaded Cap Screw, 1/4-20, 2 in L Under Head, A2 (18-8) Grade, Stainless Steel
MORSE® 51097 5374 Standard Length Jobber Length Drill Bit, B Drill - Letter, 0.238 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
