Browning 2-3/16"-ID SPH/OD INSERT BEARINGS BRW VE-135
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289310951
-
Manufacturer Part Number767333
-
CountryUSA
-
Load Capacity9752 lb Dynamic/6601 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed1750 rpm
-
Closure TypeDouble Seal
-
TypeLight Duty Straight Bore
-
Width1.984 in
-
SeriesVE Series
-
Bearing MaterialSteel
-
Outside Diameter3.937 in
-
Bore Diameter2.188 in
- Eccentric locking device
- Contact seal
- Thru hardened inner race heat treat method
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
-
Alternative Part NumberVE-135
-
UNSPSC31171504
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
-
Warranty Information
-
Catalog
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Hougen® Holcutter™ 14005C Electrician's and Fabricator's Kit, 11 Pieces, HSS, Bright
Hougen® 14009 Arbor With Pilot, 3/8 in Shank
Weiler® 10037 Circular Flared Stem Mount End Brush, 1-1/2 in Dia Brush, Crimped, 0.008 in Dia Filament/Wire, Steel Fill, 3/4 in L Trim
Weiler® 10037 Circular Flared Stem Mount End Brush, 1-1/2 in Dia Brush, Crimped, 0.008 in Dia Filament/Wire, Steel Fill, 3/4 in L Trim
Milwaukee® M18™ FUEL™ 2743-20 Cordless Finish Nailer, 1-1/4 to 2-1/2 in Fastener, 110 Nails Magazine, 11-29/32 in OAL, Battery
The M18™ FUEL™ 15 ga finish nailer delivers on the promise of peak productivity at your worksite, providing unmatched driving power, speed and efficiency with practically no set up and minimal maintenance. Using the exceptional application speed, power and durability of our compact POWERSTATE™ brushless motor, plus our ready to fire cylinder design, this tool is capable of fully sinking 2-1/2 in nails into solid oak with zero ramp-up time this 18 V nailer operates from the revolutionary REDLITHIUM™ battery for unbeatable strength and runtime , eliminating the mess and cost of gas cartridges it also includes REDLINK™ Plus™ intelligence, the most advanced electronic system on the market, to prevent damage to the nailer and battery from overloading and overheating. The M18™ fuel nailer not only primes you for top performance; it also creates the experience of a pneumatic nailer that professional carpenters and remodelers expect, without the hassle of compressors and hoses.
MORSE® 11659 1330B General Purpose Jobber Length Drill Bit, 9/32 in Drill - Fraction, 0.2812 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
Leviton® 85012 Standard Size Wall Plate, 4 Gangs, 8.18 in W x 4.5 in H, Thermoset, Brown
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.

