Sealmaster 2-1/4"-ID SPH/OD BB INSERT BEARING SEA 2-24
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000380
-
Manufacturer Part Number700040
-
CountryUSA
-
Load Capacity11789 lb Dynamic/8150 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3000 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard-Duty Straight Bore
-
Seal MaterialFelt
-
Width2-9/16 in
-
Bearing MaterialSteel
-
Outside Diameter4.3307 in
-
Bore Diameter2-1/4 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-24
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
2-1/2" SCH-80 CPVC SOCKET CAPS-NIB1847025 >
LU-150/55 150-watt M Bulbs
The LU150/55 is a 150-Watt High Pressure Sodium (HPS) HID light bulb that operates at 55 Volts. It uses standard ANSI S55 ballast infrastructure and produces a distinct warm, golden-white light (2000K - 2100K). It is primarily engineered for commercial, industrial, security, and street lighting applications.
MAKE CLEAN, STEADY, CUTS OF ALL WALLCOVERING, SHELF OR PACKAGING PAPER WITH THE WALLPAPER RAZOR KNIFE. THE LARGE CECON PLASTIC HANDLE FITS COMFORTABLE IN THE HAND, PROVIDING EXTRA LEVERAGE AND CONTROL. THE SINGLE EDGE BLADE IS REVSERSIBLE FOR SAFETY AND CAN BE REPLACED WHEN NECESSARY. THE KNIFE FEATURES AN EASY, CLICK TO OPEN, CLICK-TO CLOSE BLADE CHANGE CAPABILITY.
-JWH772907 >
Dichtomatik 67002762 O-Ring, 63 mm ID x 73 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
IKO IRB1212 Inch Series Inner Ring, 3/4 in ID x 1 in OD, 19.43 mm OAW, For Use With BA1612Z/BHA1612Z and YB1612 Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
