Sealmaster® 700015 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 1 in Dia Bore, 2.0472 in OD, 1-3/8 in W, 2801 lb Dynamic/1651 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000137
-
Manufacturer Part Number700015
-
CountryUSA
-
Load Capacity2801 lb Dynamic/1651 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed6350 rpm
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width1-3/8 in
-
Bearing MaterialSteel
-
Outside Diameter2.0472 in
-
Bore Diameter1 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-1
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® 700015 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 1 in Dia Bore, 2.0472 in OD, 1-3/8 in W, 2801 lb Dynamic/1651 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
5/16" DIAMETERX2-1/2" DOWEL PIN-HOL01082 >
Proto® J4924MCF Crowfoot Wrench, 24 mm Wrench, 3/8 in Drive, 2-13/32 in OAL, ASME B107.21, Full Polished
Proto® J4924MCF Crowfoot Wrench, 24 mm Wrench, 3/8 in Drive, 2-13/32 in OAL, ASME B107.21, Full Polished
Browning® 767377 VPE 200 Normal Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-9/16 to 5-7/16 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-3/4 in OAL x 3-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
ISOSTATIC™ Oilube® 401282 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/16 in OD, 1 in W
ISOSTATIC™ Oilube® 401282 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/16 in OD, 1 in W
ISOSTATIC™ Century® 104375 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-1/8 in OD, 1-1/2 in W
ISOSTATIC™ Century® 104375 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-1/8 in OD, 1-1/2 in W
