Sealmaster® 702052 Medium Duty Non-Expansion Straight Bore Ball Bearing Insert, 1-3/4 in Dia Bore, 3.5433 in OD, 2-1/2 in W, 7889 lb Dynamic/5216 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461015186
-
Manufacturer Part Number702052
-
CountryUSA
-
Load Capacity7889 lb Dynamic/5216 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed5000 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width2-1/2 in
-
Bearing MaterialSteel
-
Outside Diameter3.5433 in
-
Bore Diameter1-3/4 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Double setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number3-112D
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® 702052 Medium Duty Non-Expansion Straight Bore Ball Bearing Insert, 1-3/4 in Dia Bore, 3.5433 in OD, 2-1/2 in W, 7889 lb Dynamic/5216 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
FYH® UC202 10 UC Series Cylindrical Pillow Block Unit, 5/8 in Dia Bore, 1.22 in W, 12.8 kN Dynamic/6.65 kN Static Load
FYH® UC202 10 UC Series Cylindrical Pillow Block Unit, 5/8 in Dia Bore, 1.22 in W, 12.8 kN Dynamic/6.65 kN Static Load
Dichtomatik N70357 O-Ring, 357 Dash Number, 5.475 in ID x 5.895 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MORSE® 22673 1697 Bridge Reamer, 11/16 in Dia x 11-3/4 in L, #3 Morse Taper Shank, Straight Flute
MORSE® 22673 1697 Bridge Reamer, 11/16 in Dia x 11-3/4 in L, #3 Morse Taper Shank, Straight Flute
12/24V AMBER WARNING LIGHTS-NASLED625MXA>
HCI Preferred Supplier 5405412 Adapter, 1/4 x 3/4 in Nominal, MPT x FPT End Style, Steel
HCI Preferred Supplier 5405412 Adapter, 1/4 x 3/4 in Nominal, MPT x FPT End Style, Steel
