Browning® 765118 VS Series Medium Duty Straight Bore Ball Bearing Insert With Seal Flinger, 1.188 in Dia Bore, 2.835 in OD, 1.688 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289526512
-
Manufacturer Part Number765118
-
CountryUSA
-
Load Capacity5782 lb Dynamic/3493 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed4000 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Straight Bore
-
Width1.688 in
-
SeriesVS Series
-
Bearing MaterialSteel
-
Outside Diameter2.835 in
-
Bore Diameter1.188 in
- Single setscrew locking
- Single lip contact seal
- Zone hardened inner race
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
-
Alternative Part NumberVS-319
-
UNSPSC31171504
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® 765118 VS Series Medium Duty Straight Bore Ball Bearing Insert With Seal Flinger, 1.188 in Dia Bore, 2.835 in OD, 1.688 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
1" X 25' TAPE MEASURES & TAPE RULES-JWH332607 >
Gardner Bender 10-126 Butt Splice, 12 to 10 AWG Conductor, 1.04 in L, Yellow
POLY SLINGS-LIFEE2802DFX8>
BBI 847668 Fully Threaded Cap Screw, 1-8, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847668 Fully Threaded Cap Screw, 1-8, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
Simpson Strong-Tie® LUS26 Double-Shear Face-Mount Joist Hanger, 2 x 6 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
