Sealmaster 1-11/16"-ID SPH/OD INSERT BEARINGS SEA 2-111
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000274
-
Manufacturer Part Number700029
-
CountryUSA
-
Load Capacity7901 lb Dynamic/5139 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3800 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width1-15/16 in
-
Bearing MaterialSteel
-
Outside Diameter3.3465 in
-
Bore Diameter1-11/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-111
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
12-OZ VACUUM PUMP OIL-
Starrett® 93B 93 Series Tap Wrench, 7/32 to 7/16 in Tap, Non-Ratcheting, 2-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 65mm (2 1/2") Length, 5.5-11mm (7/32-7/16") Tap Size.
Milwaukee® M18™ FUEL™ 2861-20 Mid Torque Cordless Impact Wrench With Friction Ring, 1/2 in Square Drive, 3000 bpm, 600 ft-lb Torque, 18 VDC, 6.77 in OAL
Delivering 450 ft-lb fastening torque and 600 ft-lb nut-busting torque, the M18™ FUEL™ mid-torque impact wrench is more powerful while also being upto 2 in shorter and upto 1.5 lb lighter than many competitive impact wrenches. The POWERSTATE™ brushless motor delivers upto 0 to 2400 rpm resulting in increased productivity. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ compact batteries or extended capacity batteries (sold separately), the M18™ FUEL™ mid-torque delivers more work per charge and more work over the life of the pack than competitive batteries on the market. The 3-mode DRIVE CONTROL™ provides greater control over output speed and power for greater versatility. At 6.7 in L and 5.3 lb with a 5.0Ah battery, the M18™ FUEL™ 1/2 in mid-torque impact wrench delivers the balance and weight desired by professionals for all day use. This tool offers quick, tool-free socket changes with a 1/2 in friction ring anvil. A new overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
1-1/4" -ID HIGH PILLOW BLOCK UNIT-BRWVPS220S >
MCR Safety 1220D Economy Grade General Purpose Gloves, Gunn Cut/Wing Thumb Style, Cowhide Leather/Denim, Blue/Gray, Safety Cuff, Uncoated Coating, Fleece Lining
MCR Safety 1220D Economy Grade General Purpose Gloves, Gunn Cut/Wing Thumb Style, Cowhide Leather/Denim, Blue/Gray, Safety Cuff, Uncoated Coating, Fleece Lining
