Loctite® 235005 lb 8150™ 1-Part Heavy Duty Anti-Seize Lubricant, 1 lb Brush-In Cap Bottle, Paste Form, Silver, 1.25
LOCTITE SILVER GRADE ANTI-SEIZE is a heavy-duty, high temperature, anti-seize lubricant that resists galling and corrosion and reduces wear in heavy pressure applications. This product is used to lubricate and to permit easy disassembly of assemblies exposed to high temperatures, heavy contact pressures in mines, power generation plants, pulp and paper plants, chemical plants, quarries, transportation, water treatment plants and general industry.
-
BrandLoctite®
-
UPC079340767645
-
Manufacturer Part Number235005
-
CountryUSA|Canada
-
Temperature Range-20 to 1600 deg F
-
Flash Point>199.4 deg F
-
FormPaste
-
ColorSilver
-
Type1-Part Heavy Duty
-
CompositionDistillates (Petroleum), Hydro treated Heavy Naphthenic, Graphite, Calcium Oxide, Petroleum Distillates, Hydro treated, Light Naphthenic, Aluminum Not Powder, Dust or Fume, Distillates (Petroleum), Straight-Run Middle, Quartz (SiO2)
-
VOC Content<3%
-
Container Size1 lb
-
Container TypeBrush-In Cap Bottle
-
Serieslb 8150™
-
Specific Gravity1.25
-
Odor/ScentHydrocarbon
- Loctite lb 8150® Silver grade anti-seize is a heavy duty, temperature resistant, pertroleum-based lubricant compound fortified with graphite and metallic flake
- Inert, will not evaporate or harden in extreme cold or heat
- For use in assemblies to 1600 deg F
- 0.18 K-Value
- Electrically conductive
- Applicable materials Metal: aluminum, Metal: steel, Metal: soft metals
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | LM5076764 |
| Berkshire eSupply | LM5076764 |
| Berkshire eSupply | LM5076764 |
-
Alternative Part Number76764
-
UNSPSC15121515
-
Package Description1/PK
-
Standards/ApprovalsISO Certified|OSHA 29 CFR 1910.1200|GHS Certified|CFIA Approved|Mil-PRF-907F
-
Catalog
Recently Viewed
Loctite® 235005 lb 8150™ 1-Part Heavy Duty Anti-Seize Lubricant, 1 lb Brush-In Cap Bottle, Paste Form, Silver, 1.25
LOCTITE SILVER GRADE ANTI-SEIZE is a heavy-duty, high temperature, anti-seize lubricant that resists galling and corrosion and reduces wear in heavy pressure applications. This product is used to lubricate and to permit easy disassembly of assemblies exposed to high temperatures, heavy contact pressures in mines, power generation plants, pulp and paper plants, chemical plants, quarries, transportation, water treatment plants and general industry.
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
Dichtomatik 67013355 O-Ring, 42 mm ID x 46 mm OD, FKM, 80 Shore A Durometer, Import, Custom H-2 x 42-VITON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
Milwaukee® M18™ FUEL™ 2861-20 Mid Torque Cordless Impact Wrench With Friction Ring, 1/2 in Square Drive, 3000 bpm, 600 ft-lb Torque, 18 VDC, 6.77 in OAL
Delivering 450 ft-lb fastening torque and 600 ft-lb nut-busting torque, the M18™ FUEL™ mid-torque impact wrench is more powerful while also being upto 2 in shorter and upto 1.5 lb lighter than many competitive impact wrenches. The POWERSTATE™ brushless motor delivers upto 0 to 2400 rpm resulting in increased productivity. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ compact batteries or extended capacity batteries (sold separately), the M18™ FUEL™ mid-torque delivers more work per charge and more work over the life of the pack than competitive batteries on the market. The 3-mode DRIVE CONTROL™ provides greater control over output speed and power for greater versatility. At 6.7 in L and 5.3 lb with a 5.0Ah battery, the M18™ FUEL™ 1/2 in mid-torque impact wrench delivers the balance and weight desired by professionals for all day use. This tool offers quick, tool-free socket changes with a 1/2 in friction ring anvil. A new overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
4X10X1/2UHMWCON 48" X 120" X 1/2" Anti-stat
48" X 120" X 1/2" ANTI-STAT UHMW SHEET-CPI4X10X1/2UHMWCON>
M.K. Morse 1/2" 10/14T BANDSAW BLADE--RL/100' MOR Z-WED-C-1014-MAT-100
Morse® Matrix II 393413100C Band Saw Blade Coil Stock, 1/2 in W x 0.02 in THK, 10/14 TPI, 100 ft L Coil, HSS Tooth
