Browning 15/16"-ID SPH/OD INSERT BEARINGS BRW VE-215
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289519545
-
Manufacturer Part Number767958
-
CountryUSA
-
Load Capacity2801 lb Dynamic/1651 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed5500 rpm
-
Closure TypeDouble Seal
-
TypeStandard Duty Straight Bore
-
Width1-3/4 in
-
SeriesVE Series
-
Bearing MaterialSteel
-
Outside Diameter2.047 in
-
Bore Diameter0.938 in
- Eccentric locking device
- Contact seal
- Thru hardened inner race heat treat method
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
-
Alternative Part NumberVE-215
-
UNSPSC31171504
-
Package DescriptionEACH
-
Warranty1 Year
-
Warranty Information
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Milwaukee® 4204-1 Adjustable Position Electromagnetic Drill Press, 1/2 in Chuck, 1-1/4 hp, 1-1/4 in Drill to Center From Base, 600 rpm Spindle Speed, 120 VAC
This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Dichtomatik N70318 O-Ring, 318 Dash Number, 0.975 in ID x 1.395 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
DeWALT® DW505 Dual Range Heavy Duty Lightweight VSR Hammer Drill, 1/2 in Keyed Chuck, 120 VAC, 13 in OAL
50-B-35-F1-7/16 35 Tooth Sprockets For #50
35 TOOTH SPROCKETS FOR #50 CHAIN-IDC50B35F17/16 >
ISOSTATIC™ Oilube® 401288 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 1-1/4 in W
ISOSTATIC™ Oilube® 401288 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 1-1/4 in W
