INS-SC-012 Dodge® 123332 204 Normal Duty Set Screw Ball Bearing, 3/4 in Dia Bore, 1.8504 in OD, 1.23 in W, 2899 lb Dynamic/1482 lb Static Load
INS-SC-012 Dodge® 123332 204 Normal Duty Set Screw Ball Bearing, 3/4 in Dia Bore, 1.8504 in OD, 1.23 in W, 2899 lb Dynamic/1482 lb Static Load
-
BrandDodge®
-
UPC782475232673
-
Manufacturer Part Number123332
-
CountryUSA
-
Load Capacity2899 lb Dynamic/1482 lb Static
-
Cage MaterialCast Iron
-
Temperature Rating225 to 400 deg F
-
FinishUncoated
-
Maximum Speed7500 rpm
-
TypeNormal Duty
-
Width1.23 in
-
Series204
-
Outside Diameter1.8504 in
-
Bore Diameter3/4 in
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100000324 |
| Applied Industrial Technologies | 100000324 |
-
Alternative Part NumberINS-SC-012
-
UNSPSC31171504
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
INS-SC-012 Dodge® 123332 204 Normal Duty Set Screw Ball Bearing, 3/4 in Dia Bore, 1.8504 in OD, 1.23 in W, 2899 lb Dynamic/1482 lb Static Load
INS-SC-012 Dodge® 123332 204 Normal Duty Set Screw Ball Bearing, 3/4 in Dia Bore, 1.8504 in OD, 1.23 in W, 2899 lb Dynamic/1482 lb Static Load
Dichtomatik N70114 O-Ring, 114 Dash Number, 0.612 in ID x 0.818 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
HYDRANT KNOBS-NIB25173 >
FAUCET HANDLE FITS ALL LUCITE CANOPY FAUCETS, AND GIVES NEW STYLE AND CHARM TO OLD FAUCETS. CLEAR IN COLOR AND UNBREAKABLE-JWH411815 >
Dichtomatik N70115 O-Ring, 115 Dash Number, 0.674 in ID x 0.88 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
FYH® ER210 31 ER Series Cylindrical Ball Bearing Insert, 1-15/16 in Dia Bore, 3.54 in OD, 2.03 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® ER210 31 ER Series Cylindrical Ball Bearing Insert, 1-15/16 in Dia Bore, 3.54 in OD, 2.03 in W, 35.1 kN Dynamic/23.3 kN Static Load
