FYH® SA206 19FP9 SA Series Narrow Inner Ring Bearing Pillow Block Unit, 1-3/16 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SA206 19FP9 SA Series Narrow Inner Ring Bearing Pillow Block Unit, 1-3/16 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
-
BrandFYH®
-
Manufacturer Part NumberSA206 19FP9
-
CountryUSA
-
Load Capacity19.5 kN Dynamic/11.3 kN Static
-
TypeNarrow
-
Width1.18 in
-
SeriesSA Series
-
Bore Diameter1-3/16 in
Recently Viewed
FYH® SA206 19FP9 SA Series Narrow Inner Ring Bearing Pillow Block Unit, 1-3/16 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SA206 19FP9 SA Series Narrow Inner Ring Bearing Pillow Block Unit, 1-3/16 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. The 1101-1 features 500 RPM and can be used with our right angle drive attachment to increase versatility.
1" X 1" X 6' SQUARE STEEL TUBING A36 mild carbon steel alloy. Common structural steel in U.S.A. Minimum yield of 36,000 PSI (250 MPa) and ultimate tensile strength of 58,000 to 80,000 PSI (400-550 MPa).
Browning® 767567 VS 100 Intermediate Duty Straight Bore Ball Bearing Insert, 1/2 in Dia Bore, 1.5748 in OD, 15/16 in W, 2108 lb Dynamic/1117 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
3-1/2-LB FIBERGLASS-HANDLE DOUBLE BITAX E-MAD3804 >
NIBCO 75-103-01 2-Piece Ball Valve, 1/2 in Nominal, FNPT End Style, Bronze Body, Standard Port, MPTFE Softgoods, Domestic
This Apollo™ Ball Valve meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked in the OPEN or CLOSED position with the same hardware.
