Flanged Cam Followers & Track Runners
Smith Bearing® SMITH-TRAX® FCR-1-1/2 Heavy Duty Stud Type Deep Groove Ball Bearing Track Roller, 1-1/2 in Dia Roller, 1-3/16 in W Roller, 2-3/16 in Dia Flange, 5/8 in Dia Stud, 1-1/2 in L Stud
FCR Series bearings are designed to handle both axial and radial loads by using tapered roller bearings or deep groove ball bearings. These bearings should be used when standard needle roller bearings are not sufficient to handle the thrust load found in certain applications.
Recently Viewed
Rust-Oleum Professional Striping Machine is designed to apply sharp, crisp lines on parking lots, athletic fields and other venues where striping is needed. The machine can create a line that is anywhere from 2 in. to 4 in. wide. It comes with a convenient storage area that can hold up to 12 additional cans of paint.
GEARWRENCH® 81741 Long Length Open End Combination Wrench, 23 mm Wrench, 12 Points, 15 deg Offset, 324 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
The 0370-20 close quarters angle drill provides a unique chuck angle for reaching into tight areas. Its large paddle trigger and textured grip area provides comfort and control in all positions. The angled cord exit keeps the cord out of the work area. The convenient forward/reverse lever is easy to use in close quarters.
Drillco 1000EF140 Imperial Silver and Deming Drill, 5/8 in Drill - Fraction, 0.625 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
MORSE® 15118 1437 General Purpose Screw Machine Drill, #46 Drill - Wire, 0.081 in Drill - Decimal Inch, HSS, Bright
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB112K>
