Smith Bearing® SMITH-TRAX® FCR-1-1/2 Heavy Duty Stud Type Deep Groove Ball Bearing Track Roller, 1-1/2 in Dia Roller, 1-3/16 in W Roller, 2-3/16 in Dia Flange, 5/8 in Dia Stud, 1-1/2 in L Stud
FCR Series bearings are designed to handle both axial and radial loads by using tapered roller bearings or deep groove ball bearings. These bearings should be used when standard needle roller bearings are not sufficient to handle the thrust load found in certain applications.
-
BrandSmith Bearing®
-
UPC651041149212
-
Manufacturer Part NumberFCR-1-1/2
-
CountryUSA
-
Load Capacity1370 lb Static
-
Thread Length3/4 in
-
Thread Size5/8-18 UNF-2A
-
Flange Diameter2-3/16 in
-
Flange Thickness11/32 in
-
TypeHeavy Duty Stud Type
-
Roller Diameter1-1/2 in
-
Roller MaterialAlloy Steel
-
Roller Width1-3/16 in
-
SeriesFCR
-
Stud Diameter5/8 in
-
Stud Length1-1/2 in
-
Stud MaterialAlloy Steel
-
Stud TypeFlanged
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 15U564 |
-
UNSPSC31171541
-
Warranty12 months
-
Catalog
Recently Viewed
Smith Bearing® SMITH-TRAX® FCR-1-1/2 Heavy Duty Stud Type Deep Groove Ball Bearing Track Roller, 1-1/2 in Dia Roller, 1-3/16 in W Roller, 2-3/16 in Dia Flange, 5/8 in Dia Stud, 1-1/2 in L Stud
FCR Series bearings are designed to handle both axial and radial loads by using tapered roller bearings or deep groove ball bearings. These bearings should be used when standard needle roller bearings are not sufficient to handle the thrust load found in certain applications.
Drillco 72A104C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
METAL IMPACT SPRINKLER WITH METAL SLED BASE. FULL OR PARTIAL CIRCLE COVERAGE. COVERAGE UP TO 86 FT. DIAMETER. SERIES CONNECTION TO LINK MULTIPLE SPRINKLERS.
- JWH724372>
1/2" X 21' METAL BLACK PIPE-JWH437026 >
Porter-Cable® 7403 Abrasive Paint Remover
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
