Flat Follower & Track Runners
Smith Bearing® CR-5/8-X Cylindrical Stud Type Needle Bearing Cam Follower, 5/8 in Dia x 7/16 in W Roller, 1/4 in Dia x 3/4 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
Smith Bearing® CR-7/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 7/8 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
Smith Bearing® HR-1-1/4-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1-1/4 in Dia x 3/4 in W Roller, 3/4 in Dia x 1-1/4 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Smith Bearing® HR-1-1/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1-1/8 in Dia x 5/8 in W Roller, 5/8 in Dia x 1 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Smith Bearing® HR-1-X Cylindrical Stud Type Needle Bearing Cam Follower, 1 in Dia x 5/8 in W Roller, 5/8 in Dia x 1 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Smith Bearing® HR-1/2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 1/4 in Dia x 5/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Smith Bearing® HR-2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 2 in Dia x 1-1/4 in W Roller, 1-1/8 in Dia x 2 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Smith Bearing® HR-3/4-XB Cylindrical Stud Type Needle Bearing Cam Follower, 3/4 in Dia x 1/2 in W Roller, 7/16 in Dia x 7/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Smith Bearing® HR-7/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 7/8 in Dia x 1/2 in W Roller, 7/16 in Dia x 7/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
Smith Bearing® SMITH XTREME™ NUKR-35 Crowned Double Row Heavy Duty Roller Stud Type Needle Bearing Cam Follower, 35 mm Dia x 18 mm W Roller, 16 mm Dia x 32.5 mm L Stud, 52100 Steel Roller
Made with a double row of heavy rollers for extremely high load applications. These heavy duty bearings are assembled with metallic side shields helping to retain grease and keep out containments.
Torrington 5/8" CAM FOLLOWERS TOR CRS-10-1
Track rollers (also known as cam followers) are characterized by their thick-walled outer rings that run directly on a track. The thick outer rings permit high load-carrying capability while minimizing both distortion and bending stresses. Sealed designs with internal thrust washers help extend service life under conditions of infrequent lubrication.
Torrington 7/8" CAM FOLLOWERS TOR CRS-14
Track rollers (also known as cam followers) are characterized by their thick-walled outer rings that run directly on a track. The thick outer rings permit high load-carrying capability while minimizing both distortion and bending stresses. Sealed designs with internal thrust washers help extend service life under conditions of infrequent lubrication.
Recently Viewed
PIX 550-J-6 POLY RIB J V-BELT, 55" OC, 6 RIBS, 0.92" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX550J6 >
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX630J10>
Dichtomatik S70113 O-Ring, 113 Dash Number, 0.549 in ID x 0.755 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
HCI Preferred Supplier GE214NPT 2-Way High Pressure Ball Valve, 1/4 in Nominal, NPTF End Style, Steel Body, Full Port, Buna-N® O-Ring Softgoods
HCI Preferred Supplier GE214NPT 2-Way High Pressure Ball Valve, 1/4 in Nominal, NPTF End Style, Steel Body, Full Port, Buna-N® O-Ring Softgoods
RIDGID® 32975 Close Quarter Tubing Cutter, 1/8 to 5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32975 Close Quarter Tubing Cutter, 1/8 to 5/8 in Nominal, Ergonomic Grip Handle
Protect your workpieces from damage with a fresh set of Wilton R-6 Rubber Face 6" Jaw Caps in your Wilton 11106 Bench Vise. These authentic replacement caps are made of aluminum and synthetic rubber. Rubber faces conform to the workpiece and grip firmly without slipping.
